Idea
In short
How do you build a tracked robot with phone control?
A tank-track chassis is driven from a phone over Bluetooth with a simple command set. You need Arduino Nano, HC-05 Bluetooth Module, Tank tracks chassis kit, L298N Dual H-Bridge Module, Resistor 1 kΩ, Resistor 4.7 kΩ and 9 V battery.
- Level
- Intermediate
- Time
- About 300 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control a robot over Bluetooth serial.
Parts list
- Development Boards
- Wireless
- Mechanical & Hardware
- Motor Drivers
- Passives
- Passives
- Batteries
How to build it
- Assemble the chassis
- Wire the motor driver
- Divide the TX signal for the module
- Pair with a phone
- Map commands to motion
Common questions
What parts do I need for the tracked robot with phone control?
Arduino Nano, HC-05 Bluetooth Module, Tank tracks chassis kit, L298N Dual H-Bridge Module, Resistor 1 kΩ, Resistor 4.7 kΩ and 9 V battery.
How long does the tracked robot with phone control take to build?
About 300 minutes for a intermediate maker.
