Idea
In short
How do you build an omni wheel cart with obstacle stop?
A small cart on omni wheels stops when an obstacle sensor sees something close. You need Arduino Nano, Omni wheel 58 mm × 2, Robot car chassis kit 2WD (acrylic), L298N Dual H-Bridge Module, IR obstacle avoidance sensor module and 9 V battery.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Add safety stopping to a moving robot.
Parts list
- Development Boards
- Mechanical & HardwareOmni wheel 58 mm × 2
- Mechanical & Hardware
- Motor Drivers
- Sensors
- Batteries
How to build it
- Mount the wheels
- Drive the motors
- Read the obstacle sensor
- Stop quickly
- Back away and turn
Common questions
What parts do I need for the omni wheel cart with obstacle stop?
Arduino Nano, Omni wheel 58 mm × 2, Robot car chassis kit 2WD (acrylic), L298N Dual H-Bridge Module, IR obstacle avoidance sensor module and 9 V battery.
How long does the omni wheel cart with obstacle stop take to build?
About 240 minutes for a intermediate maker.
