Projects / Ideas / Wave-open bin lid

Wave-open bin lid

IntermediateSmart HomeIdeaReviewed
In short

How do you build a wave-open bin lid?

A time-of-flight sensor opens a small servo lid when a hand is held close. You need Arduino Nano, VL53L1X long-range ToF sensor, MG90S metal gear micro servo and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Trigger a servo from a distance sensor.

Parts list

How to build it

  1. Read the distance
  2. Set a trigger distance
  3. Open the lid
  4. Close after a delay
  5. Avoid false triggers

Related projects

Common questions

What parts do I need for the wave-open bin lid?

Arduino Nano, VL53L1X long-range ToF sensor, MG90S metal gear micro servo and Breadboard 830 Tie Points.

How long does the wave-open bin lid take to build?

About 210 minutes for a intermediate maker.