Idea
In short
How do you build a lidar distance display?
A small lidar sensor reads distances up to several metres over a serial link and shows them in centimetres. You need Arduino Nano, TFmini-S LiDAR, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read a lidar over serial.
Parts list
- Development Boards
- Sensors
- Displays
- Prototyping
How to build it
- Wire the serial lines
- Read the frame
- Check the checksum
- Show the distance
- Compare with a tape measure
Common questions
What parts do I need for the lidar distance display?
Arduino Nano, TFmini-S LiDAR, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the lidar distance display take to build?
About 180 minutes for a intermediate maker.
