Idea
In short
How do you build a table tennis rally counter?
A piezo disc stuck under the edge of a table feels each bounce of the ball, and the Nano counts the bounces in a rally and shows the longest on a screen. A button starts a new game. A cheerful way to see how a piezo makes a signal from a knock. You need Arduino Nano, Piezo disc buzzer element, Resistor 100 kΩ, SSD1306 OLED Display, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Beginner
- Time
- About 80 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Count the bounces in a table tennis rally.
Parts list
- Development Boards
- Motors & Actuators
- Passives
- Displays
- Switches
- Prototyping
- Prototyping
How to build it
- Stick the piezo disc under the table
- Read it with a resistor across it
- Count a bounce above a threshold
- End the rally after a long gap
- Show the current and the longest rally
Common questions
What parts do I need for the table tennis rally counter?
Arduino Nano, Piezo disc buzzer element, Resistor 100 kΩ, SSD1306 OLED Display, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the table tennis rally counter take to build?
About 80 minutes for a beginner maker.
