Idea
In short
How do you build a supercapacitor solar sensor node?
A supercapacitor charged by a tiny solar panel runs a sensor that sends a reading when there is enough energy. You need Supercapacitor 5.5 V 1 F, Solar panel 6 V 1 W, Schottky Diode 1N5819, ESP32 DevKit V1, BME280 Environmental Sensor and Zener diode 5.1 V (1N4733A).
- Level
- Advanced
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use energy harvesting without a battery.
Parts list
- Power
- Power
- Semiconductors
- Development Boards
- Sensors
- Semiconductors
How to build it
- Charge the capacitor through a diode
- Limit the voltage with a clamp
- Wake the ESP32 only when charged
- Send a reading and sleep
- Log how often it can report
Common questions
What parts do I need for the supercapacitor solar sensor node?
Supercapacitor 5.5 V 1 F, Solar panel 6 V 1 W, Schottky Diode 1N5819, ESP32 DevKit V1, BME280 Environmental Sensor and Zener diode 5.1 V (1N4733A).
How long does the supercapacitor solar sensor node take to build?
About 240 minutes for a advanced maker.
