Projects / Ideas / LED stroboscope for rpm

LED stroboscope for rpm

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build an LED stroboscope for rpm?

A flashing LED at an adjustable rate freezes a spinning object to read its speed. You need Arduino Nano, High-power LED 3 W (star), MOSFET IRLZ44N, Rotary encoder module (KY-040), TM1637 4-digit display, 12 V 2 A DC adapter and Heatsink TO-220.

Level
Intermediate
Time
About 120 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Measure rotation with a strobe.

Parts list

How to build it

  1. Flash the LED at set Hz
  2. Show rpm
  3. Tune until the pattern freezes
  4. Use sub-harmonics
  5. Warn about photosensitivity

Related projects

Common questions

What parts do I need for the LED stroboscope for rpm?

Arduino Nano, High-power LED 3 W (star), MOSFET IRLZ44N, Rotary encoder module (KY-040), TM1637 4-digit display, 12 V 2 A DC adapter and Heatsink TO-220.

How long does the LED stroboscope for rpm take to build?

About 120 minutes for a intermediate maker.