Idea
In short
How do you build a stand-up reminder desk?
A VL53L1X distance sensor measures the height of a desk top and a Pico reminds you with a beep and a message to stand after you have been sitting, and shows how long you have stood. Reminders are general wellbeing hints, not medical advice. You need Raspberry Pi Pico H, VL53L1X long-range ToF sensor, SSD1306 OLED Display, Passive buzzer and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 140 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Remember to change position at a desk.
Parts list
- Development Boards
- Sensors
- Displays
- Motors & Actuators
- Prototyping
How to build it
- Wire the sensor and display on I2C
- Measure the desk height
- Tell sitting from standing height
- Time each position
- Remind after a set time
Related projects
Common questions
What parts do I need for the stand-up reminder desk?
Raspberry Pi Pico H, VL53L1X long-range ToF sensor, SSD1306 OLED Display, Passive buzzer and Breadboard 830 Tie Points.
How long does the stand-up reminder desk take to build?
About 140 minutes for a intermediate maker.
