Idea
In short
How do you build a pico pulse rate display?
A Pico reads a pulse sensor on an ADC pin, finds the beat peaks and shows beats per minute on an OLED. A hobby demo only, not a medical device; do not use it to judge health. You need Raspberry Pi Pico H, Heart rate sensor (pulse sensor), SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Estimate pulse rate from a fingertip sensor.
Parts list
- Development Boards
- Sensors
- Displays
- Prototyping
How to build it
- Wire the sensor to an ADC pin
- Sample at 500 Hz
- Find the beat peaks
- Convert the beat gaps to a rate
- Show a rate and a beat marker
Common questions
What parts do I need for the pico pulse rate display?
Raspberry Pi Pico H, Heart rate sensor (pulse sensor), SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the pico pulse rate display take to build?
About 150 minutes for a intermediate maker.
