Projects / Ideas / Pocket weather card

Pocket weather card

IntermediateDisplaysIdeaReviewed
In short

How do you build a pocket weather card?

A small colour screen shows temperature, humidity and pressure as a card with a coloured bar for each. You need Raspberry Pi Pico H, 1.69 inch TFT (ST7789, 240x280), BME280 Environmental Sensor and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 180 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Draw a data card on a colour screen.

How to build it

  1. Wire the screen on SPI
  2. Draw the card layout
  3. Read the sensor
  4. Colour the bars by value
  5. Update without flicker

Related projects

Common questions

What parts do I need for the pocket weather card?

Raspberry Pi Pico H, 1.69 inch TFT (ST7789, 240x280), BME280 Environmental Sensor and Breadboard 830 Tie Points.

How long does the pocket weather card take to build?

About 180 minutes for a intermediate maker.