Projects / Ideas / SPI or I2C OLED speed test

SPI or I2C OLED speed test

BeginnerDisplaysIdeaReviewed
In short

How do you build an SPI or I2C OLED speed test?

Drive the same display type over SPI and over I2C and time how many frames each can draw per second. You need Arduino Uno R3, 0.96 inch OLED SPI (SSD1306, 7-pin), SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Beginner
Time
About 120 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Compare two display buses.

How to build it

  1. Wire the SPI display
  2. Wire the I2C display
  3. Draw the same animation on each
  4. Count frames per second
  5. Try a higher bus speed

Related projects

Common questions

What parts do I need for the SPI or I2C OLED speed test?

Arduino Uno R3, 0.96 inch OLED SPI (SSD1306, 7-pin), SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the SPI or I2C OLED speed test take to build?

About 120 minutes for a beginner maker.