Projects / Ideas / Snow and hail depth sensor

Snow and hail depth sensor

IntermediateEnvironmentIdeaReviewed
In short

How do you build a snow and hail depth sensor?

A VL53L1X time-of-flight sensor on a mast measures the depth of snow or hail on a board below it for hill-station schools. You need ESP32 DevKit V1, VL53L1X long-range ToF sensor, SSD1306 OLED Display and Waterproof enclosure IP65 (junction box).

Level
Intermediate
Time
About 120 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Measure distance with a laser sensor and subtract a stored baseline.

How to build it

  1. Mount the sensor 1 m above a flat white board
  2. Store the empty-board distance as zero
  3. Take the median of 10 readings
  4. Depth = baseline − distance
  5. Log daily maximum depth

Related projects

Common questions

What parts do I need for the snow and hail depth sensor?

ESP32 DevKit V1, VL53L1X long-range ToF sensor, SSD1306 OLED Display and Waterproof enclosure IP65 (junction box).

How long does the snow and hail depth sensor take to build?

About 120 minutes for a intermediate maker.