Idea
In short
How do you build a wildlife camera trap with AI filter?
A battery camera trap keeps only photos that contain animals and drops wind-blown leaves. You need Raspberry Pi Zero 2 W, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi Camera Module 3, PIR Motion Sensor HC-SR501, Li-ion 18650 pack 3S 2P (11.1 V), LM2596 Buck Module and Waterproof enclosure IP65 (junction box).
- Level
- Intermediate
- Time
- About 300 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Filter images with a model to save storage and battery.
Parts list
- Single Board Computers
- SBC Accessories
- SBC Accessories
- Sensors
- Batteries
- Power
- Mechanical & Hardware
How to build it
- Wake on PIR
- Take a burst of photos
- Classify animal or empty
- Keep only animal photos
- Measure battery life in the field
Common questions
What parts do I need for the wildlife camera trap with AI filter?
Raspberry Pi Zero 2 W, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi Camera Module 3, PIR Motion Sensor HC-SR501, Li-ion 18650 pack 3S 2P (11.1 V), LM2596 Buck Module and Waterproof enclosure IP65 (junction box).
How long does the wildlife camera trap with AI filter take to build?
About 300 minutes for a intermediate maker.
