Idea
In short
How do you build a bird species camera feeder?
A camera at a bird feeder takes a photo when a bird lands and a model names the species. You need Raspberry Pi Zero 2 W, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi Camera Module 3 and PIR Motion Sensor HC-SR501.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Trigger a camera and classify the image.
Parts list
- Single Board Computers
- SBC Accessories
- SBC Accessories
- Sensors
How to build it
- Trigger on motion
- Take a few photos
- Classify the bird with a model
- Save the best photo with the name
- Post a daily summary
Common questions
What parts do I need for the bird species camera feeder?
Raspberry Pi Zero 2 W, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi Camera Module 3 and PIR Motion Sensor HC-SR501.
How long does the bird species camera feeder take to build?
About 240 minutes for a intermediate maker.
