Idea
In short
How do you build a slotted-disc tachometer?
A slotted optical switch and a printed disc measure the speed of a small motor and show RPM on an LCD. You need Arduino Nano, Slotted optical switch (H21A1), 16x2 LCD with I2C backpack (PCF8574), DC motor 130 size (toy motor), IRLZ34N logic-level MOSFET and Signal Diode 1N4148.
- Level
- Beginner
- Time
- About 90 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Count pulses over time and convert to revolutions per minute.
Parts list
- Development Boards
- Optoelectronics
- Displays
- Motors & Actuators
- Semiconductors
- Semiconductors
How to build it
- Print or cut a disc with several slots
- Place it in the optical switch
- Count pulses with an interrupt
- Convert to RPM over a one-second window
- Test at different motor voltages
Common questions
What parts do I need for the slotted-disc tachometer?
Arduino Nano, Slotted optical switch (H21A1), 16x2 LCD with I2C backpack (PCF8574), DC motor 130 size (toy motor), IRLZ34N logic-level MOSFET and Signal Diode 1N4148.
How long does the slotted-disc tachometer take to build?
About 90 minutes for a beginner maker.
