Projects / Ideas / Single switch phrase scanner

Single switch phrase scanner

IntermediateAssistive TechIdeaReviewed
In short

How do you build a single switch phrase scanner?

One large arcade button is all the user needs: a Nano steps through a short list of phrases on an OLED, and a press picks the one on screen and sounds a distinct tone. It shows the idea behind switch access, and it is a learning build, not a certified communication aid. You need Arduino Nano, Arcade push button 30 mm, SSD1306 OLED Display, Passive buzzer, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Intermediate
Time
About 120 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Choose a phrase with one big press.

How to build it

  1. Wire the big button and the display
  2. List five short phrases
  3. Highlight each phrase in turn at a set speed
  4. Pick on a press and sound its tone
  5. Make the speed adjustable and test with a friend

Related projects

Common questions

What parts do I need for the single switch phrase scanner?

Arduino Nano, Arcade push button 30 mm, SSD1306 OLED Display, Passive buzzer, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the single switch phrase scanner take to build?

About 120 minutes for a intermediate maker.