Idea
In short
How do you build a menu and settings box?
A small display shows a menu you move with a knob and save to memory so settings survive power-off. You need Arduino Nano, 1.3 inch OLED (SH1106, I2C), Rotary encoder module (KY-040) and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a menu with saved settings.
Parts list
- Development Boards
- Displays
- Sensors
- Prototyping
How to build it
- Wire the display and knob
- Draw a list
- Move the highlight
- Edit a value
- Save with the EEPROM
Common questions
What parts do I need for the menu and settings box?
Arduino Nano, 1.3 inch OLED (SH1106, I2C), Rotary encoder module (KY-040) and Breadboard 830 Tie Points.
How long does the menu and settings box take to build?
About 270 minutes for a intermediate maker.
