Projects / Ideas / Menu system with a rotary encoder

Menu system with a rotary encoder

IntermediateDisplaysIdeaReviewed
In short

How do you build a menu system with a rotary encoder?

A rotary encoder scrolls through menu items on a 20 by 4 character LCD and changes settings. You need Arduino Nano, Rotary encoder module (KY-040), 20x4 LCD with I2C backpack, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Intermediate
Time
About 210 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build a reusable menu with an encoder.

How to build it

  1. Read encoder turns and clicks
  2. Draw a menu list
  3. Highlight the current item
  4. Edit a numeric value
  5. Save settings in EEPROM

Related projects

Common questions

What parts do I need for the menu system with a rotary encoder?

Arduino Nano, Rotary encoder module (KY-040), 20x4 LCD with I2C backpack, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the menu system with a rotary encoder take to build?

About 210 minutes for a intermediate maker.