1.3 inch OLED (SH1106, I2C)
Slightly bigger OLED. Uses the SH1106 driver, so pick that library, not SSD1306.
TypeMonochrome OLED
Size1.3 inch
Resolution128 × 64
Driver ICSH1106
DisplaysReviewedMPN SH1106 128x64Used in 4 projects
In short
What is the 1.3 inch OLED (SH1106, I2C) and what is it used for?
Slightly bigger OLED. Uses the SH1106 driver, so pick that library, not SSD1306. Makers use it for easier-to-read status screens.
How it works
An SH1106 controller driving a 128 × 64 OLED panel.
Key specifications
| Display spec | Value |
|---|---|
| Type | Monochrome OLED |
| Size | 1.3 inch |
| Resolution | 128 × 64 |
| Driver IC | SH1106 |
| Interface | I2C |
| I2C address | 0x3C |
| Supply voltage | 3.3 to 5 V |
Pinout
VCC3.3 to 5 V
GNDGround
SCLI2C clock
SDAI2C data
NoteSome boards put GND first, so check the labels
How to use it
Use U8g2 with the SH1106 constructor or Adafruit_SH110X. SSD1306 libraries give a shifted, noisy picture because the SH1106 has 132 columns.
Applications
Easier-to-read status screens
Builds that use it
Alternatives
- SSD1306 OLED DisplaySmaller, wider library support
- 2.42 inch OLED (SSD1309)Much larger
Common questions
What is the 1.3 inch OLED (SH1106, I2C) used for?
In maker projects: easier-to-read status screens.
How does the 1.3 inch OLED (SH1106, I2C) work?
An SH1106 controller driving a 128 × 64 OLED panel.
What voltage does the 1.3 inch OLED (SH1106, I2C) need?
3.3 to 5 V.
How do I connect the 1.3 inch OLED (SH1106, I2C) to an Arduino or ESP32?
I2C. Pins: VCC (3.3 to 5 V), GND (Ground), SCL (I2C clock), SDA (I2C data), Note (Some boards put GND first, so check the labels).
What can I use instead of the 1.3 inch OLED (SH1106, I2C)?
SSD1306 OLED Display and 2.42 inch OLED (SSD1309).
