Projects / Ideas / Light-following pan-tilt head

Light-following pan-tilt head

IntermediateRoboticsIdeaReviewed
In short

How do you build a light-following pan-tilt head?

Four light sensors steer a pan-tilt head toward the brightest direction. You need Arduino Nano, Servo pan-tilt bracket (SG90), LDR Photoresistor × 4, Resistor 10 kΩ × 4 and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 270 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Seek light with two servos.

Parts list

How to build it

  1. Build the bracket
  2. Read four light sensors
  3. Compare left right and up down
  4. Move the servos
  5. Add a dead zone

Related projects

Common questions

What parts do I need for the light-following pan-tilt head?

Arduino Nano, Servo pan-tilt bracket (SG90), LDR Photoresistor × 4, Resistor 10 kΩ × 4 and Breadboard 830 Tie Points.

How long does the light-following pan-tilt head take to build?

About 270 minutes for a intermediate maker.