Idea
In short
How do you build a single-axis sun tracker?
Two light sensors turn a small panel on a servo to face the brightest light. You need Arduino Nano, LDR Photoresistor × 2, Resistor 10 kΩ × 2, MG90S metal gear micro servo, Solar panel 6 V 1 W and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Track light with one servo.
Parts list
- Development Boards
- Sensors
- PassivesResistor 10 kΩ × 2
- Motors & Actuators
- Power
- Prototyping
How to build it
- Mount the sensors on either side of a divider
- Compare the two readings
- Move the servo a little
- Add a dead zone
- Measure the panel gain
Common questions
What parts do I need for the single-axis sun tracker?
Arduino Nano, LDR Photoresistor × 2, Resistor 10 kΩ × 2, MG90S metal gear micro servo, Solar panel 6 V 1 W and Breadboard 830 Tie Points.
How long does the single-axis sun tracker take to build?
About 270 minutes for a intermediate maker.
