Idea
In short
How do you build a two-node RS-485 line test?
Two boards talk over a twisted pair using RS-485 modules, with termination and a loopback test. You need Arduino Nano × 2, RS485 to TTL module (MAX485) × 2, Resistor 100 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points × 2.
- Level
- Advanced
- Time
- About 330 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Learn robust wired communication.
Parts list
- Development BoardsArduino Nano × 2
- Interfaces
- Passives
- Displays
- Prototyping
How to build it
- Wire the modules to each board
- Set transmit and receive direction
- Send a short message
- Add a 120 ohm terminator
- Lengthen the cable and test
Common questions
What parts do I need for the two-node RS-485 line test?
Arduino Nano × 2, RS485 to TTL module (MAX485) × 2, Resistor 100 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points × 2.
How long does the two-node RS-485 line test take to build?
About 330 minutes for a advanced maker.
