Idea
In short
How do you build a text reader for low vision?
Point a camera at printed text, press a button and a Pi reads it aloud using OCR and speech. You need Raspberry Pi 5, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi 27 W USB-C power supply, Raspberry Pi Camera Module 3, Tactile push button 6 mm, Speaker 8 Ω 0.5 W and PAM8403 stereo amplifier module.
- Level
- Advanced
- Time
- About 300 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Chain OCR and text-to-speech.
Parts list
- Single Board Computers
- SBC Accessories
- SBC Accessories
- SBC Accessories
- Switches
- Motors & Actuators
- Audio
How to build it
- Take a sharp photo on button press
- Clean and threshold the image
- Run OCR
- Speak the text
- Add a repeat and slower button
Common questions
What parts do I need for the text reader for low vision?
Raspberry Pi 5, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi 27 W USB-C power supply, Raspberry Pi Camera Module 3, Tactile push button 6 mm, Speaker 8 Ω 0.5 W and PAM8403 stereo amplifier module.
How long does the text reader for low vision take to build?
About 300 minutes for a advanced maker.
