Idea
In short
How do you build a hallway motion chime?
A microwave motion sensor plays a short chime when someone walks into the hall. You need Arduino Nano, RCWL-0516 microwave radar motion sensor, Passive buzzer, Resistor 1 kΩ, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Beginner
- Time
- About 100 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use a different type of motion sensor.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Passives
- Prototyping
- Prototyping
How to build it
- Wire the sensor
- Read its output
- Play a chime
- Add a quiet-hours switch
- Compare it with a PIR
Common questions
What parts do I need for the hallway motion chime?
Arduino Nano, RCWL-0516 microwave radar motion sensor, Passive buzzer, Resistor 1 kΩ, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the hallway motion chime take to build?
About 100 minutes for a beginner maker.
