Projects / Ideas / Radar presence sensor

Radar presence sensor

IntermediateSmart HomeIdeaReviewed
In short

How do you build a radar presence sensor?

A microwave motion sensor shows whether someone is at their desk, even when sitting still for a short time. You need Arduino Nano, RCWL-0516 microwave radar motion sensor, LED 5 mm red, Resistor 220 Ω and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 150 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Detect presence with a radar module.

How to build it

  1. Wire the module
  2. Read the output
  3. Hold the state with a timer
  4. Compare with a PIR sensor
  5. Tune placement

Related projects

Common questions

What parts do I need for the radar presence sensor?

Arduino Nano, RCWL-0516 microwave radar motion sensor, LED 5 mm red, Resistor 220 Ω and Breadboard 830 Tie Points.

How long does the radar presence sensor take to build?

About 150 minutes for a intermediate maker.