Idea
In short
How do you build a glowing heart pulse lamp?
A pulse sensor on a fingertip makes a 3D printed heart pulse with your heartbeat. It is a toy for fun. You need Arduino Uno R3, Heart rate sensor (pulse sensor), High-power LED 1 W white (star), BC547 NPN transistor and Resistor 1 kΩ.
- Level
- Beginner
- Time
- About 60 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Detect a pulse and trigger a light.
Parts list
- Development Boards
- Sensors
- Optoelectronics
- Semiconductors
- Passives
How to build it
- Wire the pulse sensor
- Detect the rising edge of each beat
- Pulse the LED per beat
- Show the heartbeat on the serial plotter
- Add a diffuser
Common questions
What parts do I need for the glowing heart pulse lamp?
Arduino Uno R3, Heart rate sensor (pulse sensor), High-power LED 1 W white (star), BC547 NPN transistor and Resistor 1 kΩ.
How long does the glowing heart pulse lamp take to build?
About 60 minutes for a beginner maker.
