Idea
In short
How do you build a low-power weather logger?
A small 3.3 V board sleeps most of the time, wakes to record the air and goes back to sleep to run for weeks on a battery. You need Arduino Pro Mini 3.3 V 8 MHz, BME280 Environmental Sensor, MicroSD Card Module, AAA alkaline battery × 2 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Log weather for weeks.
Parts list
- Development Boards
- Sensors
- Interfaces
- Batteries
- Prototyping
How to build it
- Wire the sensor and card
- Log every minute
- Add sleep
- Measure the current
- Estimate the run time
Common questions
What parts do I need for the low-power weather logger?
Arduino Pro Mini 3.3 V 8 MHz, BME280 Environmental Sensor, MicroSD Card Module, AAA alkaline battery × 2 and Breadboard 830 Tie Points.
How long does the low-power weather logger take to build?
About 270 minutes for a intermediate maker.
