Idea
In short
How do you build a pico weather station?
A Pico reads a BME280 and shows temperature, humidity and pressure, with a small trend arrow for pressure over three hours. Readings are indicative only. You need Raspberry Pi Pico H, BME280 Environmental Sensor, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 160 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Show a pressure trend from stored readings.
Parts list
- Development Boards
- Sensors
- Displays
- Prototyping
How to build it
- Read the BME280 on I2C
- Store a pressure reading every ten minutes
- Compare with the reading three hours ago
- Show a rising, falling or steady arrow
- Show all three values
Common questions
What parts do I need for the pico weather station?
Raspberry Pi Pico H, BME280 Environmental Sensor, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the pico weather station take to build?
About 160 minutes for a intermediate maker.
