Idea
In short
How do you build a pico LED strip animations?
A Pico drives a strip with rainbow, chase and fire animations chosen with a button. You need Raspberry Pi Pico 2, WS2812B strip 5 m (30 LEDs/m), Tactile push button 6 mm, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Drive addressable LEDs from a Pico.
Parts list
- Development Boards
- Optoelectronics
- Switches
- Power
- Prototyping
How to build it
- Wire the data line through a resistor
- Run a rainbow
- Add a chase
- Add a button to change animation
- Add a brightness limit
Common questions
What parts do I need for the pico LED strip animations?
Raspberry Pi Pico 2, WS2812B strip 5 m (30 LEDs/m), Tactile push button 6 mm, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
How long does the pico LED strip animations take to build?
About 240 minutes for a intermediate maker.
