Projects / Ideas / Pico workshop tool check-in log

Pico workshop tool check-in log

IntermediateHome LabIdeaReviewed
In short

How do you build a pico workshop tool check-in log?

A Pico reads 125 kHz tags from an RDM6300 reader and logs which tag checked a tool out or in, shown on an OLED. Only tag IDs are stored, no names; tell people using the tags. You need Raspberry Pi Pico H, RDM6300 125 kHz RFID reader, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 150 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Track who has a shared tool without paperwork.

How to build it

  1. Wire the reader and divide its 5 V serial output for the Pico
  2. Read the tag frame
  3. Check the checksum
  4. Toggle checked out or in
  5. Show the last event

Related projects

Common questions

What parts do I need for the pico workshop tool check-in log?

Raspberry Pi Pico H, RDM6300 125 kHz RFID reader, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the pico workshop tool check-in log take to build?

About 150 minutes for a intermediate maker.