Idea
In short
How do you build a pico air quality bar?
A Pico reads an MQ-135 air quality module on its ADC through a divider and lights three LEDs as the reading rises. Indicative only; let the sensor warm up and keep it away from flames and strong solvents. You need Raspberry Pi Pico H, MQ-135 air quality sensor module, LED 5 mm red, Resistor 330 Ω, Resistor 1 kΩ, Resistor 10 kΩ and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 130 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Show a rough air quality level with LEDs.
Parts list
- Development Boards
- Sensors
- Semiconductors
- Passives
- Passives
- Passives
- Prototyping
How to build it
- Divide the 5 V analog output down for the Pico ADC
- Let the sensor warm up
- Read the ADC
- Pick thresholds
- Light the LEDs
Common questions
What parts do I need for the pico air quality bar?
Raspberry Pi Pico H, MQ-135 air quality sensor module, LED 5 mm red, Resistor 330 Ω, Resistor 1 kΩ, Resistor 10 kΩ and Breadboard 830 Tie Points.
How long does the pico air quality bar take to build?
About 130 minutes for a beginner maker.
