Idea
In short
How do you build a nucleo alarm clock?
A Nucleo-64 board reads a DS3231 clock chip, shows the time on an OLED and sounds a passive buzzer at an alarm time set with two buttons. Keep the buzzer volume modest. You need STM32 Nucleo-64, DS3231 RTC module, SSD1306 OLED Display, Passive buzzer, Tactile push button 6 mm × 2 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build an alarm clock with set and snooze buttons.
Parts list
- Development Boards
- Sensors
- Displays
- Motors & Actuators
- Switches
- Prototyping
How to build it
- Wire the clock and display on I2C
- Show the time
- Set the alarm with two buttons
- Compare time and alarm
- Sound the buzzer and snooze
Related projects
Common questions
What parts do I need for the nucleo alarm clock?
STM32 Nucleo-64, DS3231 RTC module, SSD1306 OLED Display, Passive buzzer, Tactile push button 6 mm × 2 and Breadboard 830 Tie Points.
How long does the nucleo alarm clock take to build?
About 180 minutes for a intermediate maker.
