Idea
In short
How do you build a doorstep snapshot camera?
A Pi camera takes a photo when a button or a motion sensor triggers and saves it with the time. You need Raspberry Pi 4 Model B (4 GB), Raspberry Pi Camera Module 3, PIR Motion Sensor HC-SR501 and Raspberry Pi 15 W USB-C power supply.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Capture images on an event.
Parts list
- Single Board Computers
- SBC Accessories
- Sensors
- SBC Accessories
How to build it
- Enable the camera
- Read the PIR on a GPIO pin
- Take a photo on motion
- Save with a timestamp
- Limit photos per minute
Common questions
What parts do I need for the doorstep snapshot camera?
Raspberry Pi 4 Model B (4 GB), Raspberry Pi Camera Module 3, PIR Motion Sensor HC-SR501 and Raspberry Pi 15 W USB-C power supply.
How long does the doorstep snapshot camera take to build?
About 240 minutes for a intermediate maker.
