Idea
In short
How do you build a tray item counter?
An AI accelerator counts screws, resistors or other small items on a tray from a camera picture. Point it at objects only, not at people. You need Raspberry Pi 5 (16 GB), Raspberry Pi AI Kit (13 TOPS), Raspberry Pi Camera Module 2 and SanDisk microSD card 32 GB (A1, Class 10).
- Level
- Advanced
- Time
- About 420 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Count objects with an accelerator.
Parts list
- Single Board Computers
- SBC Accessories
- SBC Accessories
- SBC Accessories
How to build it
- Fit the accelerator
- Run a demo model
- Place a tray under the camera
- Count one item class
- Show the count
Common questions
What parts do I need for the tray item counter?
Raspberry Pi 5 (16 GB), Raspberry Pi AI Kit (13 TOPS), Raspberry Pi Camera Module 2 and SanDisk microSD card 32 GB (A1, Class 10).
How long does the tray item counter take to build?
About 420 minutes for a advanced maker.
