Idea
In short
How do you build a drowsy driver eye tracker?
An IR camera tracks the driver's eyes and sounds an alarm if they stay closed too long. You need Raspberry Pi 5, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi 27 W USB-C power supply, Arducam 5 MP OV5647 camera for Raspberry Pi, IR LED 850 nm (night vision) × 2 and Active buzzer 5 V.
- Level
- Advanced
- Time
- About 360 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Track facial landmarks in low light.
Parts list
- Single Board Computers
- SBC Accessories
- SBC Accessories
- SBC AccessoriesUse a NoIR version
- Optoelectronics
- Motors & Actuators
How to build it
- Light the face with IR LEDs
- Find eye landmarks
- Work out how open the eyes are
- Alarm when closed for over 1.5 s
- Test in a parked car only
Common questions
What parts do I need for the drowsy driver eye tracker?
Raspberry Pi 5, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi 27 W USB-C power supply, Arducam 5 MP OV5647 camera for Raspberry Pi, IR LED 850 nm (night vision) × 2 and Active buzzer 5 V. Arducam 5 MP OV5647 camera for Raspberry Pi: Use a NoIR version.
How long does the drowsy driver eye tracker take to build?
About 360 minutes for a advanced maker.
