Idea
In short
How do you build a light-to-pitch probe?
A handheld probe turns brightness into a rising tone, so a person with low vision can find a lit window, a lamp that is on or a screen. You need Arduino Nano, Phototransistor L14F1 / PT333, Resistor 10 kΩ, Passive buzzer, Potentiometer 10 kΩ and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 100 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Hear how bright it is.
Parts list
- Development Boards
- Optoelectronics
- Passives
- Motors & Actuators
- Passives
- Prototyping
How to build it
- Read the phototransistor on an analog pin
- Map brightness to pitch
- Add a range knob
- Set a quiet floor so noise is silent
- Test on windows and lamps
Common questions
What parts do I need for the light-to-pitch probe?
Arduino Nano, Phototransistor L14F1 / PT333, Resistor 10 kΩ, Passive buzzer, Potentiometer 10 kΩ and Breadboard 830 Tie Points.
How long does the light-to-pitch probe take to build?
About 100 minutes for a beginner maker.
