Idea
In short
How do you build a clock chip drift lab?
Set two clock chips, a DS3231 and a PCF8563, to the same time from the computer and log their difference from the computer clock for a day. You see how much a basic crystal drifts compared with a temperature-compensated one. You need Arduino Nano, DS3231 RTC module, PCF8563 RTC, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 90 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Compare two clock chips over a day.
Parts list
- Development Boards
- Sensors
- Integrated Circuits
- Prototyping
- Prototyping
How to build it
- Wire both clock chips on the I2C bus
- Set both from the computer
- Print their times every minute
- Compare with the computer in a spreadsheet
- Plot the drift for each
Common questions
What parts do I need for the clock chip drift lab?
Arduino Nano, DS3231 RTC module, PCF8563 RTC, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the clock chip drift lab take to build?
About 90 minutes for a intermediate maker.
