Idea
In short
How do you build a sixteen-channel LED fader?
A servo driver chip fades sixteen LEDs separately over two wires, for smooth wave and chase effects. You need Arduino Nano, PCA9685 16-channel servo driver, LED 5 mm red × 16, Resistor 330 Ω × 16 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Fade many LEDs.
Parts list
- Development Boards
- Motor Drivers
- SemiconductorsLED 5 mm red × 16
- PassivesResistor 330 Ω × 16
- Prototyping
How to build it
- Wire the board
- Set the frequency
- Fade one LED
- Run a wave pattern
- Add a speed knob
Common questions
What parts do I need for the sixteen-channel LED fader?
Arduino Nano, PCA9685 16-channel servo driver, LED 5 mm red × 16, Resistor 330 Ω × 16 and Breadboard 830 Tie Points.
How long does the sixteen-channel LED fader take to build?
About 240 minutes for a intermediate maker.
