Idea
In short
How do you build an eight-switch bank reader?
A parallel-in shift register reads eight DIP switches using only three pins. You need Arduino Nano, 74HC165 parallel-in shift register, DIP switch 8-position, Resistor 10 kΩ × 8 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read many inputs with few pins.
Parts list
- Development Boards
- Integrated Circuits
- Switches
- PassivesResistor 10 kΩ × 8
- Prototyping
How to build it
- Wire the switches with pull-downs
- Latch the inputs
- Shift the data out
- Print the byte in binary
- Compare with a direct read
Common questions
What parts do I need for the eight-switch bank reader?
Arduino Nano, 74HC165 parallel-in shift register, DIP switch 8-position, Resistor 10 kΩ × 8 and Breadboard 830 Tie Points.
How long does the eight-switch bank reader take to build?
About 150 minutes for a intermediate maker.
