Projects / Ideas / Paper strip melody reader

Paper strip melody reader

IntermediateAudio & MusicIdeaReviewed
In short

How do you build a paper strip melody reader?

A reflective sensor reads black and white marks on a paper strip pulled past it and plays a note for each mark, like an old music box. Draw your own strips and hear your tunes. A fun way to see how a sensor can read data from paper. You need Arduino Nano, TCRT5000 IR reflective sensor module, Passive buzzer, Potentiometer 10 kΩ, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Intermediate
Time
About 80 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Play tunes from marks on a paper strip.

How to build it

  1. Draw black bars of different lengths on a strip
  2. Pull the strip past the sensor
  3. Time each bar and gap
  4. Play a note for each bar
  5. Set the tempo with a knob

Related projects

Common questions

What parts do I need for the paper strip melody reader?

Arduino Nano, TCRT5000 IR reflective sensor module, Passive buzzer, Potentiometer 10 kΩ, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the paper strip melody reader take to build?

About 80 minutes for a intermediate maker.