Idea
In short
How do you build a two-axis camera mount?
Two servos and a bracket move a small camera mount from two joystick axes. You need Arduino Nano, Servo pan-tilt bracket (SG90), Joystick module (dual axis) and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control two servos from a joystick.
Parts list
- Development Boards
- Motors & Actuators
- Sensors
- Prototyping
How to build it
- Read the joystick
- Map to angles
- Move the servos
- Add a centre dead zone
- Add a return-to-centre button
Common questions
What parts do I need for the two-axis camera mount?
Arduino Nano, Servo pan-tilt bracket (SG90), Joystick module (dual axis) and Breadboard 830 Tie Points.
How long does the two-axis camera mount take to build?
About 150 minutes for a intermediate maker.
