Idea
In short
How do you build a thermistor calibration lab?
Read a 10 kilohm NTC thermistor next to a digital reference sensor in warm and cool water, and fit the beta value that matches your own part. You need Arduino Nano, NTC thermistor 10 kΩ (B3950), Resistor 10 kΩ, DS18B20 waterproof probe, Resistor 4.7 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 150 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Calibrate a thermistor against a reference.
Parts list
- Development Boards
- Sensors
- Passives
- Sensors
- Passives
- Displays
- Prototyping
How to build it
- Build the thermistor divider
- Convert the reading to resistance
- Compute temperature with the beta equation
- Compare with the reference sensor
- Adjust beta to match
Common questions
What parts do I need for the thermistor calibration lab?
Arduino Nano, NTC thermistor 10 kΩ (B3950), Resistor 10 kΩ, DS18B20 waterproof probe, Resistor 4.7 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the thermistor calibration lab take to build?
About 150 minutes for a beginner maker.
