Idea
In short
How do you build a neat breadboard wiring practice?
Rebuild one circuit three times with long jumpers, pre-cut jumpers and flexible ribbon jumpers and compare neatness and debugging time. You need Jumper wire ribbon M-M (65 pcs, flexible), Breadboard jumper wire kit (140 pcs, pre-cut), Mini breadboard 170 points, Arduino Nano, LED 5 mm red × 4 and Resistor 330 Ω × 4.
- Level
- Beginner
- Time
- About 90 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Wire a breadboard neatly.
Parts list
- Prototyping
- Prototyping
- Prototyping
- Development Boards
- SemiconductorsLED 5 mm red × 4
- PassivesResistor 330 Ω × 4
How to build it
- Build with long loose wires
- Build with pre-cut jumpers
- Build with ribbon jumpers
- Time a fault-finding test
- Compare the three
Common questions
What parts do I need for the neat breadboard wiring practice?
Jumper wire ribbon M-M (65 pcs, flexible), Breadboard jumper wire kit (140 pcs, pre-cut), Mini breadboard 170 points, Arduino Nano, LED 5 mm red × 4 and Resistor 330 Ω × 4.
How long does the neat breadboard wiring practice take to build?
About 90 minutes for a beginner maker.
