Projects / Ideas / 16-channel analog reader

16-channel analog reader

IntermediateSensorsIdeaReviewed
In short

How do you build a 16-channel analog reader?

A 16-channel analog multiplexer reads many sensors with one analog pin. You need Arduino Uno R3, CD74HC4067 16-channel mux module, Potentiometer 10 kΩ × 4, LDR Photoresistor × 2, Resistor 10 kΩ × 2 and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 180 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Multiplex analog inputs.

Parts list

How to build it

  1. Set the select lines
  2. Read one channel at a time
  3. Allow settling time
  4. Print all channels
  5. Map channels to sensors

Related projects

Common questions

What parts do I need for the 16-channel analog reader?

Arduino Uno R3, CD74HC4067 16-channel mux module, Potentiometer 10 kΩ × 4, LDR Photoresistor × 2, Resistor 10 kΩ × 2 and Breadboard 830 Tie Points.

How long does the 16-channel analog reader take to build?

About 180 minutes for a intermediate maker.