Idea
In short
How do you build a smell sensor with a self-learning baseline?
An MQ-135 learns what normal room air looks like over a day and then reports how far from normal it is. You need Arduino Nano, MQ-135 air quality sensor module, SSD1306 OLED Display and 24C02 / AT24C256 EEPROM.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Learn a baseline and report deviations.
Parts list
- Development Boards
- Sensors
- Displays
- Integrated Circuits
How to build it
- Warm the sensor for 24 hours first
- Keep a slowly moving average as the baseline
- Report the ratio to baseline
- Save the baseline to EEPROM
- Test with a hand sanitiser spray
Common questions
What parts do I need for the smell sensor with a self-learning baseline?
Arduino Nano, MQ-135 air quality sensor module, SSD1306 OLED Display and 24C02 / AT24C256 EEPROM.
How long does the smell sensor with a self-learning baseline take to build?
About 120 minutes for a intermediate maker.
