Projects / Ideas / Compass heading display

Compass heading display

IntermediateMotionIdeaReviewed
In short

How do you build a compass heading display?

A nine-axis sensor shows a compass heading in degrees and a letter like N or SW, with a calibration turn. You need Arduino Nano, MPU9250 9-axis IMU, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 270 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Show a compass heading.

How to build it

  1. Wire the sensor
  2. Read the magnetometer
  3. Calibrate by turning
  4. Compute the heading
  5. Show degrees and a letter

Related projects

Common questions

What parts do I need for the compass heading display?

Arduino Nano, MPU9250 9-axis IMU, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.

How long does the compass heading display take to build?

About 270 minutes for a intermediate maker.