Idea
In short
How do you build an USB charger for a car or van?
An MP1584 buck module with a fuse, a TVS diode and a USB socket makes a safe 5 V supply from a 12 V vehicle. You need MP1584 buck module, Blade fuse with inline holder (car type), TVS diode P6KE6.8A, Electrolytic capacitor 470 µF, USB-A female breakout and Schottky Diode 1N5819.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Add protection to a vehicle power supply.
Parts list
- Power
- Passives
- Semiconductors
- Passives
- Connectors
- Semiconductors
How to build it
- Set the module to 5.1 V
- Fuse the supply close to the battery
- Add reverse polarity and surge protection
- Test with a load
- Mount it safely
Common questions
What parts do I need for the USB charger for a car or van?
MP1584 buck module, Blade fuse with inline holder (car type), TVS diode P6KE6.8A, Electrolytic capacitor 470 µF, USB-A female breakout and Schottky Diode 1N5819.
How long does the USB charger for a car or van take to build?
About 120 minutes for a intermediate maker.
