Idea
In short
How do you build a digital volume control?
An MCP4131 digital potentiometer sets audio volume from a rotary encoder or buttons. You need Arduino Nano, MCP4131 digital potentiometer, Rotary encoder module (KY-040), TL072 dual JFET op-amp, Audio jack 3.5 mm (PCB, stereo) × 2 and SSD1306 OLED Display.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control an analog level digitally.
Parts list
- Development Boards
- Integrated Circuits
- Sensors
- Integrated Circuits
- Connectors
- Displays
How to build it
- Wire the digital pot as a volume divider
- Step through 128 levels
- Buffer with an op-amp
- Show the level
- Remember the last level
Common questions
What parts do I need for the digital volume control?
Arduino Nano, MCP4131 digital potentiometer, Rotary encoder module (KY-040), TL072 dual JFET op-amp, Audio jack 3.5 mm (PCB, stereo) × 2 and SSD1306 OLED Display.
How long does the digital volume control take to build?
About 150 minutes for a intermediate maker.
