MCP4131 digital potentiometer
10 kΩ potentiometer set by SPI.
Function7-bit digital potentiometer
Supply voltage1.8 to 5.5 V
Inputs and outputsSPI
PackageDIP-8
Integrated CircuitsReviewedMPN MCP4131-103E/PUsed in 1 project
In short
What is the MCP4131 digital potentiometer and what is it used for?
10 kΩ potentiometer set by SPI. Makers use it for programmable gain and volume.
How it works
A resistor ladder with electronic switches selecting the wiper tap.
Key specifications
| Integrated circuit spec | Value |
|---|---|
| Function | 7-bit digital potentiometer |
| Supply voltage | 1.8 to 5.5 V |
| Inputs and outputs | SPI |
| Package | DIP-8 |
Pinout
1CS
2SCK
3SDI/SDO
4VSS
5P0A
6P0W, wiper
7P0B
8VDD
How to use it
Set the wiper to one of 129 positions over SPI. Pins must stay between VSS and VDD, so it cannot replace a pot on a higher-voltage circuit. Good for software volume or gain control.
Applications
Programmable gain and volume
Builds that use it
Alternatives
- X9C103 digital potentiometerUp/down control instead of SPI
Common questions
What is the MCP4131 digital potentiometer used for?
In maker projects: programmable gain and volume.
How does the MCP4131 digital potentiometer work?
A resistor ladder with electronic switches selecting the wiper tap.
What voltage does the MCP4131 digital potentiometer need?
1.8 to 5.5 V.
What can I use instead of the MCP4131 digital potentiometer?
X9C103 digital potentiometer.
