Idea
In short
How do you build a sixteen-button control panel?
An I/O expander reads sixteen buttons over two wires, so a small board can run a big panel. You need Arduino Nano, MCP23017 I/O expander module, Tactile push button 6 mm × 16, SSD1306 OLED Display and Breadboard 830 Tie Points × 2.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Add many inputs with an expander.
Parts list
- Development Boards
- Interfaces
- Switches
- Displays
- Prototyping
How to build it
- Wire the expander on I2C
- Wire the sixteen buttons
- Read all inputs in one call
- Show the pressed button
- Add an interrupt line
Common questions
What parts do I need for the sixteen-button control panel?
Arduino Nano, MCP23017 I/O expander module, Tactile push button 6 mm × 16, SSD1306 OLED Display and Breadboard 830 Tie Points × 2.
How long does the sixteen-button control panel take to build?
About 270 minutes for a intermediate maker.
